Merchandise Description
Substantial Strength Plastic Gears ,Small Plastic Wheel Gears ,Equipment Mould
Description:
Nylon PA6 Sheets & Rods that made the with one hundred% Virgin Raw Material by HangZhou Engineering Plastics Industries (Team) Company, has the best performance, such as: very tough, even at low temperatures, and high hardness in the surface, toughness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials.
Its widely used in a variety of mechanical structures and spare parts. Nylon PA6 products that made by HangZhou Engineering Plastics Industries (Group) Company, has the higher hardness, rigidity, a good resistance to wear and heat deflection temperature.
Benefits:
one. Good Tensile strength
two. High impact and notching impact strength
3. High heat deflection temperature
4. High strength and stiffness
5. Good glide and limp home characters
6. Good chemical stability against organic solvents and fuels
seven. Resistant to thermal aging (applicable temperature between -50°C and 110°C
8. Size alternation by humidity absorption must be considered
Software:
one. Nylon PA6 Products that made by HangZhou Engineering Plastics Industries (Team) Company is widely substituted for wear parts of mechanical equipment, or used as quick-wear parts of equipment instead of copper and alloy
2. Shaft sleeve, bearing bush, lining, lining plate, gear
3. Worm gear, roller copper guide rail, piston ring, seal ring, slide block
4. Spheric bowl, impeller, blade, cam, nut, valve plate,
5. Pipe, stuffing box, rack, belt pulley, pump rotor, etc.
Main Properties of Nylon
| Property | Product No. | Device | MC Nylon (Organic) | Oil Nylon+Carbon (Black) | Oil Nylon (Environmentally friendly) | MC901 (Blue) | MC Nylon+MSO2 (Light-weight black) | |
| Mechanical Properties | one | Density | g/cm3 | one.fifteen | one.15 | one.a hundred thirty five | 1.fifteen | 1.sixteen |
| two | Water absorption (23ºC in air) | % | 1.8-2. | 1.8-2. | two | 2.three | two.four | |
| three | Tensile energy | MPa | 89 | 75.three | 70 | 81 | seventy eight | |
| 4 | Tensile strain at break | % | 29 | 22.7 | twenty five | 35 | 25 | |
| 5 | Compressive stress(at 2%nominal pressure) | MPa | fifty one | fifty one | forty three | forty seven | 49 | |
| 6 | Charpy influence strength (unnotched) | KJ/mtwo | No break | No split | ≥50 | No BK | No split | |
| seven | Charpy affect strength (notched) | KJ/mtwo | ≥5.7 | ≥6.four | 4 | 3.5 | 3.five | |
| 8 | Tensile modulus of elasticity | MPa | 3190 | 3130 | 3000 | 3200 | 3300 | |
| 9 | Ball indentation hardness | N/mmtwo | 164 | 150 | a hundred forty five | a hundred and sixty | a hundred and sixty | |
| 10 | Rockwell hardness | – | M88 | M87 | M82 | M85 | M84 | |
EP also sells gear tooth measuring units known as equipment gauges! Gear gauges lessen problems, conserving time and funds when identifying and ordering gears. These pitch templates have 9 groups to decide all standard pitch measurements: Diameter Pitch “DP”, Circle Pitch “CP”, Exterior Involute Spline, Metric Modulus “MOD”, Limited Tooth, Fine Pitch, Coarse Pitch and Extraordinary Pitch .
The main benefit of worm gears is their capability to offer substantial reduction ratios and correspondingly high torque multipliers. They can also be utilised as reducers for minimal to medium speed programs. Also, simply because their reduction ratio is dependent on the variety of teeth on the gear, they are far more compact than other sorts of gears. Like good pitch leadscrews, worm gears are usually self-locking, generating them ideal for hoisting and hoisting applications.
