Powder price made in China replacement parts in Fortaleza Brazil Conical Double Screws Mixer with top quality

Powder price made in China  replacement parts  in Fortaleza Brazil Conical Double Screws Mixer with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For far more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Powder Conical Double Screws Mixer

The PerMix PNA series Conical Screw Mixer is a batch mixing products utilized widely in mixing programs that call for light mixing with nominal item distortion, nominal heat technology, and really correct mixing homogeneity. Since it was 1st designed a lot more than sixty many years back, it has been acknowledged as a good resolution for the goods which is fragile, warmth sensitive or tending to segregate.
Owing to the reason the PerMix Conical Screw Mixer uses the gravity to create the considerable downward massflow, it will save vitality in contrast with a horizontal mixer.

These Conical Screw Mixers are also showcased with no contamination to the solution in the course of the mixing, due to the simple fact that the shaft sealing & bearing is earlier mentioned the wor ept area, hence no contact with the solution.

HOW IT Works:
Within of the PerMix Conical Screw Mixer, there is a cantilevered rotating screw (or two, a few screws according to specified application) rotating by its personal axle which is in parallel to and in close proximity to the wall of the cone vessel. The mixing screw lifts the product all around it from base to the leading, and then the powder falls down due to the gravity, leading to a convective mixing.

At the same time, the screw is supported by an orbital arm and is rotating all around the centre of the cone like a planetary, so that the powders in each and every corner of the cone can be combined by the screw, and a 3-dimentional mixing functionality takes place in the complete cone.

– Feeding & Discharging
A assortment of feeding & discharging techniques available.
– Screw Kind
We offer you single screw, double screw and triple screw to give various mixing intensity.
– Push method
Drive system by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.
– Development Material and End
We are capable to offer you our PVR Mixers with speak to element to be created in Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, and many others. End of inside and exterior complete can be boring polished, one hundred eighty grit polished (food grade), or mirror polished. For abrasive components we provide hardened steel as the contact portion.
– Spray nozzle
Liquid can be additional into the powder by spray nozzles on the leading.
– Heating/Cooling jacket
Jacketed trough for heating/cooling procedure
– Vacuum drying & deaerating
PNA Conical Screw Mixers can be created to a vacuum mixer dryer for vacuum drying & deaerating or for inner stress wor ept for unique applications.

– Animal Care
Animal Feeds, Chicken Fattening Feed, Fish Foods, Mineral Feed, Pet Meals, Poultry Feed, Rabbit Feed, Veterinary Medication
– Chemical substances
Adhesives, Carbon Black, Dyestuff, Electrode Mass, Fly Ashes, Fungicides, Peat Moss Mixes, Pesticides, Prescription drugs, Pigments, Plastic Additives, Resins, Reliable Lubricants
– Every day Treatment
Aromas, Cat Box Litter, Cleansers, Detergents, Potpourri
– Constructing Supplies
Attractive Paste Coatings, Dry Mortar Mixes, Fibre Cement Cladding, Gypsum, Joint Compounds, Thermal Insulation Composite

Requirements of Conical Screw Mixer:

Model Total quantity
Wor ept quantity
Electrical power (*)
RPM Dia.
H, overall peak (**)
Inlet (***)
Outlet (****)
PNA-two hundred two hundred 120 two.2+.37 140/two 888 1557 one hundred forty 230 500
PNA-300 300 180 2.2+.37 140/two 990 1722 a hundred and eighty 230 550
PNA-500 500 three hundred three+.55 140/2 1156 1991 200 230 600
PNA-800 800 480 4+.fifty five sixty/2 1492 2256 250 three hundred 950
PNA-one thousand 1000 600 four+.55 sixty/two 1600 2432 300 300 1200
PNA-1500 1500 900 5.5+.seventy five sixty/2 1780 2725 300 300 1350
PNA-2000 2000 1200 five.5+.75 60/2 1948 3001 350 350 1500
PNA-2500 2500 1500 7.5+1.five sixty/2 2062 3571 350 350 1800
PNA-3000 3000 1800 seven.5+1.5 sixty/two 2175 3207 350 350 2100
PNA-4000 4000 2400 11+2.2 forty/2 2435 4571 four hundred 400 2500
PNA-5000 5000 3000 15+2.two 40/two 2578 4260 four hundred 400 3000
PNA-6000 6000 3600 18.5+3 forty/two 2715 4470 400 four hundred 3500
PNA-8000 8000 4800 22+three 40/1.3 2792 5000 400 450 3800
PNA-ten thousand ten thousand 6000 thirty+four forty/1.three 3000 5240 500 450 4300

1. (*) (**) (***) (****): Changes are offered in accordance to the customer’s request.
2. Customized dimensions offered as for every ask for
three. All requirements and illustrations are as correct as is fairly possible, but they are not binding.
four. PerMix reserves the right to modify the design and style with out recognize.

Device Specifics:


Our Clients:

More Products by PerMix:

PerMix Positive aspects:


Q: What is your cost amount when compared with European suppliers and nearby Chinese suppliers?
A: Based on the machine kind and measurement, our price level is thirty%-sixty% less than the European suppliers and 5-fifteen% increased than the big neighborhood suppliers.

Q: Are you ready to provide tailor-produced design and style and creation for the mixers?
A: Of course, in fact more than 50 % of our mixers are tailor made, which is 1 of our powerful points.

Q: Are you ready to design and style and create other processing products?
A: We are open up to go over about it.

Q: Can you give equipment to OEM consumers, that means to label their brands on the machines.
A: Sure we are carrying out it a great deal. We have several OEM partners in the United states.

Q: Do you have agent network out of China?
A: Sure we do have agents but only in some countries, for case in point in United states of america, Germany, Poland, Spain, Denmark, Turkey, Argentina, and so on. We are still bathroom ept for much more brokers simply because we believe to function with brokers is the best way to do enterprise.

Q: What is your delivery lead time of the mixing tools.
A: Relying on the dimensions and stage of customization, but usually it is from 6-fourteen months.

Q: How do you pack and ship the mixing devices?
A: For machines do not call for full container loading, we will pack them in wood case. For FCL (entire container loading) shipment, we will just wrap the devices in plastic movies and fix them in the container. The shipment can be either by air or by sea

The use of original gear manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the shown substitution parts contained herein are not sponsored, accepted, or produced by the OEM.

Powder price made in China  replacement parts  in Fortaleza Brazil Conical Double Screws Mixer with top quality

Powder price made in China  replacement parts  in Fortaleza Brazil Conical Double Screws Mixer with top quality